Currently Cruising Mexico
55 Polar Beluga 2000
Professionally built by Polar Boat and Yacht’s owners for themselves between 1989 and 2001. Construction was done to exacting standards. Whatever the design called for, the next level of quality or grade was used. Ancor Marine 24v, 110v and 220v wiring. Harken hardware, Bowmar hatches to name a few. That care and thought continues, as "Northern Dream" is still immaculately maintained.
Very large Master stateroom aft, two guest staterooms, two heads, double sided galley, spacious salon-dinette, dedicated navigation station and a large workshop full forward to handle any project.
Well appointed, from upholstery to lighting and beautiful joinery. The interior is finished in mahogany with teak trim, or solid teak. The cabin sole is thick solid teak and holly. Headroom is an incredible 7’1”!
Any mechanical or systems work is a breeze due to large removeable panels to the engine room.
The cockpit is very large and comfortable. The deck is easy to move around in. Storage compartments are watertight, hatches are flush.
The boat sleeps 6 comfortably in 3 staterooms, with additional sleeping for up to 3 more in the dinette and workshop. Total of 8-9 people can be accommodated. However, it is easily handled by a couple due to its furling boom and jib, and all running rigging leads aft. Enjoy the dolphin seat at the bow and watch the dolphins frolicking while you are underway.
A true blue-water boat, built tough and capable of worldwide adventuring in comfort! Her chainplates are integrated into the hull and are located by either sidegate. They are so strong that she can be lifted up on those cleats!
Built from 1989 to 2000, launched in 2001. Has sailed from Alaska down to Mexico. One-owner!
And for the welding nerds – she was built with a combination of mig and tig welding. Email the broker for more details on her hull construction, design details, and safety features.
2000 110 HP
Num of Engines
Currently Cruising Mexico
Above decks and full forward is the dolphin twin-seat, anchor, then anchor locker, followed by the sail locker. A collision bulkhead was installed aft of the lockers.
WORKSHOP: Below decks and full foward is a spacious full workshop which has a work bench surface, multiple storage cabinets, drawers, tools and AC electrical panel. The space is a woodworker and maintenance person’s dream. Some of the built-in gear includes an isolation transformer, access to the depth sounder-transducer, heater (inop).
Overhead is a rectangular oversized hatch to accommodate lowering large pieces of equipment.
FWD GUEST ROOM & HEAD: Continuing aft and to port is the forward guest stateroom. The Pullman style athwartships double berth has 6 drawers and underberth storage. Against the forward bulkheads is a vanity with a 2-door cabinet above. Cabinet under stbd side and hanging locker to port. Outward is another set of lockers, cbinets, a seat with storage, followed by cubby holes and an opening port light. Above the berth is another long 3-door storage cabinet. Overhead is a large opening hatch. The area houses a 30 gallon water heater under the bunk. Across and to starboard is the Spelndide washer/dryer combo and more storage.
The guest head has a toilet, sink, 4-door cabinet, slider bar adjustable shower head and opening port light. The shower drains to the sump pump.
Coming down the cleverly Lapierre designed dual companionway steps covered with non-skid tape is the salon-dinette to port. Navigation station is to starboard, aft of which is the door leading to the mid stateroom.
The dinette is a cross between a rectangle and an oval, and seats 8 comfortably. Upholstery is soft white leather accented by designer throw pillows. Under and behind the settee is storage throughout. Above the outward area is the entertainment center for stereo and bookshelves. The back of the settee has shelf storage.
The forward facing Navigation station is a comprehensive area of electronics, computer, printer, all at your fingertips. A comfortable upholstered seat has storage and drawers underneath. The wet locker is aft, conveniently located close to the companionway steps.
The galley is located to port and is two-sided. Port outboard is the Glacier Bay front and top-loading 8 cu. Ft. refrigerator. Behind it is a 3 cu. Ft. freezer compartment. The gimbaled stove with oven has storage beneath. Above is hexagon cabinetry showing the microwave and cabinets plus lower drawer and cabinet.
Across amidship are the double SS sinks, above a cabinet with sliders and below doube doors plus two-drawer cabinet left. Aft of the galley is the door providing portside access to the engine room, steering chain (no cable!), and shaft steering.
The Master aft stateroom is the “piece de resistance”. The elevated queen-sized in line berth is beautifully appointed. Each side has cubby holes, lockers, settees with storage, his and hers hanging lockers. Each side has swing out lamps in addition to personal reading lamps.
In the transom are two large portlights, port and starboard opening hatches, and a large opening skylight/hatch to starboard.
At the base of the berth is a beautiful marble tablet. Pneumatic cylinders lift and hold the berth while you access the huge storage space underneath. At the foot are 2 rows of 3 drawers plus a drop-down shoe-storage space. Under the upholstered seats is more storage. On each side are water-tight lockers that originate on deck for general stowage and vented propane locker holding 6 tanks bolted down.
The master head to starboard has a manual skipper toilet, rectangular porcelain sink, roomy vanity and rectangular soaking tub and shower.
To port and forward is a custom mirrored vanity. Angled corners and mirrored lights complete the area. More hanging lockers are located immediately aft of the vanity and into the stateroom.
Midships and to starboard is the additional Guest stateroom and passageway. The Pullman style double berth lays fore and aft. Beneath are six drawers and cabinet while above the pillows are 3 cubby holes. At the foot is a hanging locker with a seat beneath and more storage. There is an opening portlight to starboard.
The passageway has long removable panels to give you starboard access to the spacious engine room.
Aft is the door to access the Master Head.
All electronics are Raytheon and talk to each other via high-speed bus and “Seatalk”. Transducer is replaceable via a tube within a tube system with an O ring, in the workshop, allowing you to change or service the transducer in water.
Notable features: This well thought out vessel has many outstanding features. All hanging lockers are cedar-lined. The hatches and portlights are best quality Bowmar. Several of the lighting fixtures are state-pf-the-art Scanvic brand. Drawer sliders and hinges are of European styling. The joinery is either solid teak or mahogany with teak trim throughout.
In each head, the shower head slides on upright SS bars for tall and short crew. The portlight curtains are reversible upholstered panels with sailboat motif. The cabin sole is solid teak and holly over ¾” marine ply. The cabin sole hatches are snap locking for safety at sea while underway.
Materials used for the hull are all 50-86 with a ¼” minimum thickness. Bottom is 1” plate, Frame-to-keel is 3/8”. Hull is 3/8” x 2 ½”. Stern from bow to keel and front of keel is 1” x 3”. Keel is 1” x 3/8” x 3/8” welded in 4 places total. At the bow is a collision bulkhead and watertight compartment. 6 zincs on the keel, 3 per side which last 6-8 months each. The zinc on the bowthruster lasts upto 6 months.
Launched in 2001. Rudder is oil-filled. Custom SS propeller is mounted on a 1 ¾” shaft, custom designed by a propeller engineer to ensure that no copper is in the material to interfere with the aluminum hull.
Portside stern quarter has 2 propane vents.
Portside hull by the keel has 50-86 plate to cover all 3 tanks; pinholes can be discovered by dripping into the galley sink.
Owners personal items, heirloom clock and barometer excluded.
Engine hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.